Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Los Angeles Owner’s Guide
If you have a Boral roof in Los Angeles and a section is failing, we stock Boral-compatible roofing parts and install them for $710 – $2,950 depending on the damage. Most tile repairs are done same-day once we’re on site, and we carry standard Boral profiles on the truck so you’re not waiting on a special order. Homeowners usually find out something’s wrong after a Santa Ana wind event or the first heavy rain, when a cracked tile finally lets water through to the underlayment. You’ll see a damp spot on the ceiling, granules or tile chips in the gutter, or a neighbor points out a missing tile you never noticed.
Which Boral Models This Applies To
Boral’s concrete and clay tile lines share installation mechanics but not always dimensions, so matching matters. The main lines we work with in Los Angeles are Boral’s flat-profile concrete tile (often installed on 1950s – 1970s ranch homes in the Valley and Westside), the barrel-profile mission tile common in Spanish-style homes, and the newer lightweight profiles used on recent builds. Here’s what you need to know before anyone quotes you a repair:
- Profile shape is the first identifier. Flat, low-profile, or barrel – each has a different water channel design. You can’t swap a flat tile onto a barrel roof and expect it to seal correctly.
- Tile length and width visibly differ between series. Boral tiles run from roughly 13 to 17 inches in overall length depending on the profile. We measure the existing tile before matching, and we never guess.
- Color codes fade. After 15 years of LA sun, a tile’s underside is often the only place the original color name is still legible. We check the back of a removed tile before ordering anything.
For most Los Angeles homeowners, OEM Boral tiles are the right call when you’re repairing a visible area. They match the color, the age-worn texture, and the profile exactly. We can also install quality aftermarket tiles that match dimensionally, and we’ll tell you honestly when that’s a money-saver and when it’ll look patchy. One compatibility gotcha we see often: Boral’s newer lightweight concrete tiles are about 30% lighter than the older full-weight versions, and they don’t always sit the same way on battens installed for the older tile. We check the existing batten spacing before swapping anything.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Hairline cracks visible from the ground. Concrete tiles in LA take a beating from thermal expansion – our nights drop 30 degrees from the daytime high, and that daily cycle flexes tile until it develops stress cracks. A cracked tile lets water through to the underlayment.
- Tiles that sound hollow when tapped. A delaminating tile has separated internally. It may look whole from the ground, but it’s lost structural strength and will crack under foot traffic or the next heavy wind.
- Tile chips or granules in your gutters. Boral concrete tile sheds surface material as it ages. Finding repeated piles of granules in one downspout area usually points to one failing tile above that spot.
- Water staining on the ceiling or in the attic. By the time you see an interior stain, water has passed through the tile or flashing and is wetting the underlayment below. This is the point where the fix crosses from tile repair into underlayment repair, which runs higher and faster than a simple tile swap.
- Sun-faded, brittle tiles near the ridge or hips. Ridge and hip tiles bear the most direct UV exposure and take the brunt of wind uplift. We replace these as a set when one fails, because the rest are usually close behind.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Los Angeles Boral roofing work, tile repair runs $710 – $2,950. A simple single-tile swap at the bottom edge of the roof sits at the low end. Replacing a section around a valley, re-bedding ridge tiles, or repairing flashing and underlayment along with the tile pushes toward the upper end. Here’s the breakdown:
- Tile-only repair (1 – 5 tiles): $710 – $1,180
- Ridge or hip tile rebedding: $1,180 – $2,360
- Flashing and underlayment repair with tile reset: $1,650 – $2,950
Every quote is written, line-itemed, and fixed before work starts. That means the labor, the tile cost, the mortar or adhesive, and any disposal fee are all on the page before you approve anything. If it’s not done right, our 365-Day Done Right Promise means we return and make it right, backed in writing. We’re an independent service provider, not a Boral dealer – which means we match the tile without markup games, and we tell you plainly when an aftermarket piece will save you money.
DIY or Call Us?
You can safely check a few things from the ground: whether a tile is missing or visibly cracked, whether granules are building up in specific gutter spots, and whether you can see daylight where the ridge meets the tile. What you shouldn’t do is walk a Boral tile roof without training. Concrete tile holds, until it doesn’t – a hairline crack you can’t see will fail under your weight, and a roof in LA is a two-story fall onto hardscape most of the time. The same goes for removing and resetting tile around flashing. That’s a job for someone who knows how the underlayment seals and what a lifted tile does to the next rain. If you see one of the signs above, call us at (254) 272-5876. We’ll tell you over the phone whether it sounds like a quick tile swap or a full section repair, and the estimate to come look is free.
FAQs
Boral concrete tile roofs in Los Angeles typically last 35 – 50 years when the underlayment was installed correctly and the tiles are maintained. The tile itself is tough, but LA’s UV exposure and thermal cycling usually age the underlayment faster than the tile above it, which is why we inspect both during any repair.
Call (254) 272-5876 and we’ll tell you what we’d check on your specific roof.
A hairline crack in a single tile can sometimes be sealed as a short-term stopgap, but the honest answer is no – a cracked Boral tile has already lost its structural integrity and should be replaced, not patched. Patching buys you a season in LA’s dry months; it doesn’t survive the next rain against your underlayment.
Call (254) 272-5876 for an exact quote on tile replacement – the estimate is free.
A standard tile swap on a Boral roof in Los Angeles takes 1 – 2 hours once our technicians are on site. Ridge rebedding or flashing and underlayment work runs 4 – 6 hours, and we’ll give you a written arrival time and the name of the technician coming before we show up.
Call (254) 272-5876 and we’ll give you a realistic timeline for your specific repair.
We keep standard Boral flat and barrel profiles in common Los Angeles colors on the truck so most repairs happen in one visit. Less common colors and custom profiles are ordered locally, and we’ll tell you the lead time before you commit to anything.
Call (254) 272-5876 and we’ll check our stock against your tile profile.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.
