Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Los Angeles Owner’s Guide
Mr-Glass fence installation in Los Angeles typically runs $4,130 to $10,620 for a full section replacement with labor and materials included. We stock Mr-Glass-compatible fence panels, posts, and rail kits on our trucks, and most swaps are done in one visit. Owners usually discover a problem the same way: a panel starts wobbling after a Santa Ana wind event, or a post base shows rust staining after a wet winter against the concrete footing.
If you’re reading this while staring at a leaning fence section, you’re in the right place. Below is everything we know about matching the correct Mr-Glass part to your existing setup, what it costs in Los Angeles, and how to tell whether you need a repair or a full replacement. Sawyer Remodeling is an independent service provider, not affiliated with Mr-Glass, but we’ve installed and serviced their fence systems across LA for years.
Which Mr-Glass Models This Applies To
Mr-Glass fence systems in Los Angeles split into two main lines: the aluminum-frame glass panel series (typically 4-foot and 6-foot heights) and the frameless glass balustrade rail used on pool decks and terraces. The single biggest compatibility gotcha we see: Mr-Glass post spacing changed between their early 2010s production and the current series. Older systems used 4-foot on-center posts with a two-rail channel, while newer models run a continuous bottom rail designed for 5-to-6-foot spans. If you measure your existing post-to-post distance before you order anything, you’ll save yourself a return trip.
Every genuine Mr-Glass panel carries a small etched code on the aluminum edge or the corner gasket, usually two letters followed by four digits. That code tells us the glass thickness (8mm, 10mm, or 12mm), the finish type, and the production batch. For aftermarket equivalents, we recommend stick with 6063-T6 aluminum extrusions and tempered safety glass that matches your panel’s exact thickness. Cheap powder-coated steel posts are the one thing we tell Los Angeles owners to avoid. Coastal salt air eats through the coating within two years, especially anywhere within five miles of the beach where morning fog sits on the metal.
Styles & brands we work with
Signs Your Mr-Glass Fence Installation Is Failing
- Wobble at the top of the panel, especially in wind. The rail channel has worn or the set screws holding the glass have loosened. In Los Angeles, the Santa Ana season from September through November is when most owners first notice this. The wind loads on a 6-foot glass panel are significant, and a loose channel only gets looser.
- Green or white oxidation at post bases. Aluminum doesn’t rust, but the steel anchor bolts Mr-Glass uses in concrete footings absolutely do. Irrigation overspray is the usual culprit in LA yards. The bolt corrodes, the post loses its grip, and the whole section starts leaning.
- Water pooling inside the bottom rail channel. The weep holes clog with palm debris and dirt, and trapped water sits against the glass edge. Over time this causes the gasket seal to degrade and the panel to fog at the corners.
- Hairline cracks spreading from a corner or edge. Tempered glass doesn’t crack gradually. If you see a crack, it’s already failed and will shatter eventually. Usually happens when a post shifts slightly out of alignment and transfers a point load to the glass corner.
- Gate drag or a gate that won’t latch. The post the gate hinge mounts to has shifted. In LA’s clay-heavy soil, especially in the Valley after a wet winter, concrete footings can heave enough to throw off the gate’s alignment by a half inch or more.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Mr-Glass fence replacement in Los Angeles runs $4,130 to $10,620 depending on linear footage, glass thickness, and whether we’re reusing your existing posts or setting new footings. Here’s the breakdown:
- Section replacement with existing posts: $4,130 to $5,900. We reuse the sound posts, replace the glass panels, gaskets, and rail channels.
- Full replacement with new footings: $5,900 to $10,620. Includes demolition and haul-away, new concrete footings, new posts, new glass, new hardware.
- Gate-only repair or replacement: Usually $600 to $1,200 when bundled with adjacent panel work.
Every quote is line-itemed before we schedule the work. You’ll see the glass cost, the aluminum cost, the hardware cost, and the labor broken out separately. The price you approve is the price on the invoice. No change orders because we found something unexpected. If we find something unexpected, we show you a photo and we talk about it before any additional work happens. The work comes with our 365-Day Done Right Promise: if it’s not done right within a year, we come back and make it right, in writing, no argument.
DIY or Call Us?
There’s a version of this job a careful homeowner can do: tightening loose set screws, clearing clogged weep holes, checking post bolts with a wrench. That’s maintenance, and you should do it every year. Replacing a glass panel is a different animal. These panels weigh 80 to 120 pounds depending on size. Tempered glass doesn’t bend, it shatters, and when it goes it goes all at once into thousands of small cubes. Setting a new panel into a rail channel while keeping the gasket seated and the panel square isn’t something you want to learn on a Saturday while your dog watches from the patio.
If the post itself has moved, that’s the line. Lifting a panel is one thing. Digging a new 24-inch footing through Los Angeles clay, setting an anchor bolt in wet concrete, and getting the post perfectly plumb before the pour cures is trade work. We’ve fixed enough homeowner attempts to say this plainly: by the time you rent a concrete mixer, buy the wrong bag mix, and fight the alignment for an afternoon, you’ve spent more than the labor cost of a professional. Call (254) 272-5876 and we’ll give you a written price before any work starts.
FAQs
A properly installed Mr-Glass fence lasts 20 to 25 years in Los Angeles, with the glass itself typically outlasting the aluminum hardware. The gaskets and set screws are the wear items, usually needing attention around the 10-year mark. Coastal homes, especially in Santa Monica, Venice, and the Palisades, should expect to replace hardware sooner due to salt air. Call (254) 272-5876 and we can assess your specific fence before anything fails.
Yes, if the glass panels are intact and the posts haven’t shifted, we can often replace just the rail channels, gaskets, and hardware. That kind of repair typically runs $1,200 to $2,400 in Los Angeles depending on the length of the run. If a panel is cracked or a post has moved, a full section replacement is the honest recommendation. Call (254) 272-5876 for a free estimate and we’ll tell you exactly which situation you’re in.
A section replacement using your existing posts usually takes one full day with a two-person crew. A full replacement with new concrete footings takes two to three days, including the time for the concrete to cure enough to hold a gate. In Los Angeles weather, we can work year-round, and we’ll give you a live arrival time before we show up. Call (254) 272-5876 and we’ll give you a specific timeline for your project.
We stock the most common replacement parts on our trucks: 8mm and 10mm tempered panels, standard rail channels, gaskets, set screws, and gate hinges. For less common sizes or special finishes, we order from the supplier directly, which typically adds three to five business days. If you call (254) 272-5876, we can tell you on the phone whether we have your part in hand.
If your Mr-Glass fence is leaning, cracked, or just starting to show age, don’t wait until a panel comes down on its own. Call (254) 272-5876 today. Luca Romano and the crew at Sawyer Remodeling will give you a written price, a live arrival time, and a straight answer about what your fence actually needs. We’re the remodeling company that puts the price in writing and keeps you informed at every step. Good work doesn’t need a sales pitch. It just needs to be done right.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.
