Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Glendale, CA | Sawyer Remodeling
As a Glendale General Contractor, Ameristar construction service means one thing for most homeowners: cabinet work. We provide independent Ameristar cabinet installation, refacing, and repair across Glendale, and the single biggest difference here is the housing stock. Pre-1940s plaster walls and non-standard cabinet runs mean Ameristar boxes rarely drop in without scribing and shimming. That’s the work we’ve done for over two decades. Call (254) 272-5876 for a free estimate.
Why Glendale Residents Choose Us for Ameristar Service
Ameristar cabinets show up on job sites all over Glendale because home centers have carried the line for years. White thermofoil, almond thermofoil, shaker melamine, raised-panel doors, particleboard boxes. We know each line, how it fails, and what’s actually worth fixing. Luca Romano, our owner at Sawyer Remodeling, grew up in Silver Lake and trained at Los Angeles Trade-Technical College, so he’s been reading plans and swinging tools in LA for over two decades. That experience matters when you’re deciding whether to reface or replace a kitchen where the walls haven’t been square since 1928.
We’re an independent remodeling company, not an Ameristar dealer or authorized service center. That independence changes the conversation: when a cabinet box is swollen beyond saving, we’ll say so instead of pushing a refacing package. When OEM-spec doors and hinges will do the job, we source them. When the original hardware was the weak point, we move to premium aftermarket hinges and slides. The cabinet tells us what it needs.
Every project runs under The Relay Visibility Guarantee: a written price before any work starts, a live arrival time, and photo updates before and after. You’ll know who’s walking into your home before they arrive. Background-checked, uniformed technicians, every job. And the 365-Day Done Right Promise is in writing: if it’s not done right, we make it right, for a full year after the project closes.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Glendale
- Thermofoil peeling and delaminating. Glendale’s San Fernando Valley summers and dry Santa Ana wind cycles bake thermofoil doors. We see peeling concentrated on cabinets near windows and above ranges, where heat swings are worst. The fix is replacement doors or full refacing, depending on how far the delamination has spread.
- Swollen particleboard boxes and separated joints. Pre-1940s Glendale kitchens often have original plumbing, and a slow slab leak or a dishwasher venting under the counter wicks moisture straight into 3/4-inch particleboard boxes. Once a box swells, refacing won’t save it. We replace the damaged box and rebuild the run to match.
- Stripped concealed hinge plates and sagging doors. European-style concealed hinges thread into particleboard, and after years of daily use the screws strip out. Doors sag, gaps go uneven, and the hinge plate eventually pulls free. We repair the plate bore with proper fill and switch to soft-close hinges where the box is sound.
- Stripped shelf pin holes and sagging shelves. Ameristar shelf pins ride in small plastic sockets, and those sockets wear out. We drill and sleeve the pin holes so shelves sit level again, or install new standards and clips for heavier loads.
- Uneven yellowing on sun-facing sides. White and almond finishes fade differently depending on sun exposure through Glendale windows. A sun-facing cabinet run can yellow years before the shaded side. We’ll tell you honestly whether spot replacement will match, or whether the full run should be refaced at once.
Ameristar Service in Glendale: What Local Conditions Mean for Your Equipment
Bathroom Remodeling in Glendale faces the same challenges as our cabinet work: the city has a massive stock of pre-1940s and post-war tract homes with original plaster walls and non-standard cabinet runs. That reality shapes every Ameristar project here in a way it wouldn’t in a newer city. Ameristar replacement doors and boxes are milled to standard dimensions, but standard dimensions assume a square opening. In Glendale, a few blocks between homes can mean a completely different wall assembly: plaster over wood lath, plaster over gypsum lath, or drywall retrofits from three different decades. So we scribe, shim, and fill on nearly every install. The second part most homeowners don’t expect: cabinet work in Glendale gets pulled for City of Glendale building permits and inspection, unlike many neighboring cities with lighter residential permitting. A refacing job in Burbank might fly under the radar; in Glendale, it goes through plan check. We pull permits, schedule inspections, and pass them. That’s the difference between a cabinet job that’s done and a cabinet job that’s done right.
Ameristar Models & Products We Service in Glendale
We work on the full Ameristar cabinet line: white and almond thermofoil (RTF) door styles, shaker and raised-panel melamine lines, and 3/4-inch particleboard base and wall cabinet boxes. We also handle Ameristar overhead garage storage and utility cabinet units, which fail differently: the overhead units typically shear at the bracket connections or sag from overloaded shelves.
For parts, we use OEM-spec Ameristar replacement doors, drawer fronts, hinges, slides, and shelf pins when the box is sound. When the original hardware has failed, we move to premium aftermarket parts: soft-close hinges and full-extension drawer slides that outlast the factory pieces. We stock common Ameristar replacement components locally for fast Glendale turnaround, so you’re not waiting on a home center special order.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Glendale
Here’s what Ameristar cabinet work in Glendale realistically costs, based on the actual scope. These aren’t teaser numbers; they’re the ranges we quote and hold to in writing.
| Service | Typical Glendale Range |
|---|---|
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Countertop Installation (Quartz/Granite) | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the price: the condition of your boxes, whether the plaster walls need scribing or shimming, the door style you choose, and whether permits and inspections get added. A free estimate from us includes a line-item written price, so you’ll know exactly what you’re approving before any work starts. Call (254) 272-5876 for an exact quote.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Glendale
You can reface peeling Ameristar thermofoil cabinets if the boxes underneath are still sound. We strip the failed thermofoil doors and drawer fronts, replace them with new shaker or raised-panel doors, and apply matching veneer to the face frames. If the boxes have swollen or the joints have separated from moisture, refacing is throwing money away. We’ll tell you honestly which side of that line your kitchen is on. Call (254) 272-5876 and we’ll assess your specific cabinets.
Partly. The particleboard boxes do fine in dry heat as long as they stay dry; the thermofoil finishes don’t. Glendale’s summer heat and Santa Ana cycles delaminate thermofoil faster than coastal climates, especially on cabinets that face direct sun. If you’re keeping Ameristar boxes, we recommend door styles with wood or painted finishes over thermofoil, and we’ll show you the cost difference. Call (254) 272-5876 for a comparison quote.
Yes, and Glendale enforces this more strictly than neighboring cities. Any cabinet work that changes the footprint, moves plumbing, or affects load-bearing framing gets pulled through City of Glendale building permits and inspection. We handle the permits, schedule the inspections, and pass them. It’s part of the job, not an add-on.
Sometimes you can match discontinued Ameristar door styles with custom-milled doors from our cabinet suppliers, but exact matches aren’t always possible, especially on older thermofoil colors that have shifted with age. If a match isn’t achievable, we recommend refacing the full run so the kitchen looks intentional rather than patched. We’ll show you samples before committing.
We scribe, shim, and fill. Old Glendale plaster walls are rarely flat or square, so standard Ameristar boxes need adjustment at almost every wall intersection. We cut scribe fillers to fit the actual wall profile, shim to level, and caulk the final reveal. The cabinets end up flush and solid. For an honest quote on your specific kitchen, call (254) 272-5876.
Service Areas Near Glendale
We serve Ameristar cabinet projects throughout Glendale and the surrounding Los Angeles area. Our Ameristar sales & service work covers the full cabinet line, and our Glendale service area maps to every neighborhood in the city. For clients on the east side of the county, we also offer Ameristar service in Ontario. And for homeowners further north, Ameristar service in Elk Grove brings the same written-price, permit-pulled approach to that market.
Book Your Ameristar Service in Glendale Today
Ready to talk about your Ameristar cabinets? We’ll bring a written price, a live arrival time, and a straight answer on reface versus replace. Good work doesn’t need a sales pitch, it just needs to be done right. Call (254) 272-5876 to schedule your free estimate in Glendale.
Written by Luca Romano, Owner at Sawyer Remodeling, serving Glendale since 2005.
