Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Los Angeles Owner’s Guide
Boral kitchen remodeling in Los Angeles runs $16,520 – $53,100 for a full kitchen project, with part-specific replacements like cabinet doors, drawer fronts, or trim pieces typically landing between $200 and $1,400 installed depending on which Boral component failed. We stock Boral-compatible cabinet hardware, hinges, drawer slides, and trim profiles on our trucks and can usually match your exact model within one visit. Most Los Angeles homeowners discover a failed Boral part the hard way: a drawer that suddenly sticks, a hinge that snaps mid-close, or a cabinet door that starts sagging so badly it scrapes the frame every time you open it. You don’t need a full kitchen replacement because one part gave out, and that’s where this page comes in.
Key Takeaways:
- Boral cabinet parts are matched by series, door profile, and finish code, not just “white shaker”
- Most single-part failures cost under $1,400 installed in Los Angeles, not $20,000
- We’re an independent service provider, not affiliated with Boral, but we work with Boral-compatible parts daily
- Written price before any work starts, per The Relay Standard
Which Boral Models This Applies To
Boral’s kitchen line spans multiple cabinet series, and the part you need depends on which one you have. The biggest compatibility gotcha in Los Angeles homes: Boral changed their hinge plate spacing and boring depth across series around 2018, so a hinge from a Boral Signature cabinet won’t sit right on a Boral Elements cabinet even if the door looks identical. Measure the hinge plate from screw center to screw center. Older Boral lines typically run 35mm cup hinges with 48mm screw spacing; newer series moved to 42mm spacing with a 5mm deeper cup. That 6mm difference is the reason a well-meaning handyman replaces a hinge and the door still won’t close flush.
For drawer slides, Boral uses both side-mount and under-mount setups depending on the series. Under-mount slides pair with specific drawer box dimensions, so an aftermarket slide that’s “technically the right length” will sit too low and the drawer face will catch on the cabinet frame. We stock both configurations. For finish-matching, Boral’s paint-grade and thermofoil doors use distinct sheen levels, and thermofoil can’t be spot-painted without the repair standing out. We work with OEM-equivalent finish codes and can color-match paint-grade doors onsite. KraftMaid, Cambria, and Silestone parts are also available if your kitchen mixes brands.
Styles & brands we work with
Signs Your Boral Kitchen Remodeling Is Failing
- Drawer opens hard or won’t close all the way. Ball bearings in the slide have worn flat spots or the slide has pulled loose from the drawer box. Boral under-mount slides are sensitive to overloading, and a utensil drawer stuffed past its weight rating will kill a slide in 3 – 5 years.
- Cabinet door sags and scrapes the frame. The hinge cup has widened from stress or a screw has stripped out of the particleboard. Boral’s particleboard core holds screws well initially, but repeated slamming will chew the bore out.
- Peeling or bubbling at the door edges. Thermofoil delaminates when it first absorbed moisture or sat next to a heat source. Los Angeles dry air helps, but a dishwasher vent cycle pointed at a Boral thermofoil door will separate the laminate by year three.
- Soft-close stopped working on one drawer but not others. The damper mechanism inside the slide has leaked hydraulic fluid or snapped its internal spring. This is repairable with a slide swap, and the other slides are usually fine.
- Adjustment screws won’t hold the door in position. The hinge’s cam adjusters have stripped, often because they were over-cranked during a previous adjustment. We see this most on Boral doors that were re-hung after a flooring project changed the cabinet height.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Single Boral part replacements in Los Angeles typically run $200 – $800 installed for hinges and slides, $300 – $1,400 for a matched cabinet door or drawer front with hardware transfer. A full kitchen remodel across Los Angeles lands between $16,520 and $53,100 depending on cabinet count, countertop selection, and whether you’re replacing the cabinet boxes or refacing them. A small kitchen remodel runs $10,620 – $23,600.
What drives the range: the Boral series (thermofoil costs less to match than paint-grade or wood-veneer), whether we’re replacing one part or correcting alignment across multiple doors, and how much finish work the new piece needs. Every estimate includes the part, labor, hardware transfer, alignment, and a written line-item price before we start. If the part fails within a year, our 365-Day Done Right Promise covers the fix, and the second visit is free. No surprises when the invoice lands.
DIY or Call Us?
You can safely diagnose most Boral kitchen hardware issues without tools: check whether the hinge plate screws are tight, see if the drawer slides freely when you remove the drawer, and look for a stamped series code inside the cabinet or on the hinge cup. That code tells us exactly what’s on your kitchen. What you shouldn’t do is attempt a thermofoil repair with heat guns or re-bore hinge cups freehand. Particleboard doesn’t forgive a mis-drilled hole, and a botched bore job means replacing the door, not just the hinge. Boral’s newer hardware also sits under tension; backing out a spring-loaded hinge without holding the door can snap it closed on your hand. If the part is load-bearing or the cabinet is mounted above a range, call us. We’ll match the part, bring it to your Los Angeles home, and have the price in your hands before the first tool comes out. Call (254) 272-5876.
FAQs
A Boral hinge or drawer slide typically lasts 10 – 15 years in Los Angeles homes, though thermofoil doors near dishwashers or unshaded west-facing windows can delaminate in 5 – 7 years. The dry climate helps hardware longevity, but heat exposure is the main killer here. Call (254) 272-5876 if your kitchen is showing age before year ten.
Drawer slides and hinges should be replaced rather than repaired, since the internal bearings and dampers can’t be rebuilt once they fail; a stripped hinge bore can sometimes be re-anchored with a threaded insert if the particleboard around it is still solid. We’ll tell you honestly which route costs less. Call (254) 272-5876 and we’ll take a look.
Most single-part Boral kitchen repairs take 40 – 90 minutes onsite, though a matched door or drawer front may need a 5 – 10 day order window if we don’t have your exact series and finish on the truck. We’ll give you a live arrival time and confirm the schedule before the day. Call (254) 272-5876 for a specific timeline.
We stock Boral-compatible hinges, drawer slides, dampers, trim, and finish-matched paint-grade touch-up materials on our trucks for the most common Los Angeles series. Older or less common Boral lines may require a quick order. Call (254) 272-5876 with your series code and we’ll confirm availability before we schedule.
If your Boral kitchen is failing and you want it fixed without guesswork, call (254) 272-5876 for a free estimate. You’ll get a written price before we start, a live arrival time, and before-and-after photos of the work. Good work doesn’t need a sales pitch, it just needs to be done right. That’s how Luca Romano and the Sawyer Remodeling team handle every Boral kitchen in Los Angeles.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.
