Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Los Angeles Owner’s Guide
If you own a CGI kitchen and a cabinet door, drawer glide, or hinge has finally given out, you’re looking at a targeted repair or component replacement, not a full gut job. In Los Angeles, we typically handle CGI cabinet component repair and replacement for $2,360 – $7,670 depending on scope, while a full CGI kitchen remodel lands between $16,520 and $53,100. Most owners discover the problem the same way: a drawer that suddenly sticks, a hinge that snaps mid-morning, or a soft-close mechanism that stops soft-closing. You’re here because you want the right part matched to your specific CGI setup, priced in writing, and installed without a three-week back-and-forth.
Sawyer Remodeling is an independent Los Angeles remodeling contractor. We’re not affiliated with CGI, but we’ve worked on enough of their cabinetry to know exactly what fails, what fits, and what doesn’t.
Which CGI Models This Applies To
CGI cabinetry isn’t one product line, and that’s where most owners get tripped up. The hardware, hinge boring pattern, and drawer box dimensions vary between CGI’s framed and frameless cabinet lines. Before you order anything, pull a drawer and look for a manufacturer stamp or label on the drawer box side or under the cabinet floor. If the label’s gone, measure the overlay: how far the door or drawer front extends past the cabinet opening. CGI frameless cabinets typically run a full overlay with 35mm cup hinges, while their framed lines often use 26.5mm or 32mm boring patterns.
The compatibility gotcha we see in Los Angeles homes: a hinge from a 2010-era CGI framed cabinet will not retro-fit the 2018 frameless door, even if both are “CGI.” The cup depth and screw pattern changed. We match hardware by boring diameter, door weight, and mounting plate height, not by brand name alone. For drawer glides, measure the slide length precisely: CGI commonly specs 18″, 21″, or 24″ full-extension glides, and buying a 22″ glide because it was on sale is a wasted trip. We stock common sizes and aftermarket equivalents from Blum and Grass that match CGI factory specs, and we’re honest when OEM is the only right call.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- A drawer that drags or catches halfway. This is almost always a worn roller or ball-bearing cage inside the glide. Los Angeles dust and cooking grease work their way into the track, and once the bearing cage breaks, the drawer will never run smooth again.
- A cabinet door that won’t stay closed. The hinge spring has failed or the mounting plate screws have stripped out of the particleboard face. We see this often in older CGI cabinets where moisture from a nearby dishwasher or sink has softened the core.
- Soft-close stops working on one door but not others. The hydraulic damper inside the hinge has leaked. Once that damping fluid is gone, the hinge is just a hinge. It won’t recover.
- A drawer front that has dropped or sits crooked. The adjustment screws on the mounting plate have worked loose, or the front has begun separating from the drawer box. On CGI frameless cabinets, this is fixable with a realignment. On framed cabinets, it sometimes means a failed connector.
- A crack running through the door panel or frame joint. Los Angeles’s dry climate causes solid wood and wood-veneer doors to shrink and swell seasonally. A hairline crack at a rail-and-stile joint isn’t cosmetic forever; it grows, and water from steam eventually gets in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
The installed price for CGI kitchen component work in Los Angeles depends on how much is failing. Replacing a handful of hinges or one drawer glide typically runs $350 – $900 with the part and labor together. Replacing every hinge, glide, and soft-close mechanism across a 10-cabinet kitchen runs $2,360 – $7,670. A full CGI kitchen remodel, where we’re replacing cabinet boxes, doors, drawer fronts, and hardware, lands between $16,520 and $53,100. That range reflects cabinet count, whether you’re keeping the existing layout, and the finish grade you choose.
What’s included on every job: we bring the right parts to your door on the first visit whenever possible, we remove and dispose of the failed components, and we leave the kitchen clean. Your price is written before we start, and it does not change at the invoice. Every repair carries our 365-Day Done Right Promise: if the repair fails within a year, we make it right in writing, no argument. Call (254) 272-5876 for a free estimate, and we’ll give you a line-item price before any work begins.
DIY or Call Us?
Cabinet hinge and glide replacement isn’t dangerous the way garage door springs or electrical panel work is, so if you’re comfortable with a screwdriver and a level, you can handle a single hinge swap. The honest risk isn’t injury, it’s buying the wrong part. We’ve had Los Angeles homeowners order generic 35mm hinges online, drill new holes that nearly overlap the old ones, and end up with a door that never hangs right again. If the cabinet box itself is cracked or the face frame is pulling away, that is structural and it’s worth a professional touch.
Here’s what we’d tell a neighbor: if it’s one hinge and you can read the stamp on the old one, try it. If it’s multiple doors, drawers that stick, or anything attached to a cabinet that moves when you pull it, call us at (254) 272-5876. We’ll match the part to your CGI setup the first time, which saves you the second trip you were about to make to the hardware store.
FAQs
CGI kitchen hinges typically last 10 to 15 years in Los Angeles homes before the spring or soft-close damper fails, though hinges near a dishwasher or sink often fail sooner because heat and moisture accelerate wear. Call (254) 272-5876 and we’ll give you an exact price for your kitchen.
No, once the internal spring or hydraulic damper fails, the hinge cannot be repaired, only replaced. The good news is that a single quality replacement hinge costs less than most people expect, and we can match it to your existing hardware finish.
A full hardware swap across a typical Los Angeles kitchen takes one day, including hinge, glide, and soft-close replacement. Single-component repairs take under an hour once we’re at your home.
We stock common Blum and Grass aftermarket hardware that matches CGI factory specifications, along with a range of mounting plates and drawer glides for both framed and frameless CGI lines. For unusual finishes or older series hardware, we source OEM parts and confirm the lead time before we start.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.
