







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Los Angeles Owner’s Guide
If you’ve got an Oldcastle kitchen and something’s failed, here’s the straight answer: we install full Oldcastle kitchen remodels in Los Angeles for $16,520 to $53,100, and we can source Oldcastle-compatible cabinetry, hardware, and replacement parts without making you chase down a supplier. Most homeowners find us after a hinge gives out, a drawer slide seizes up, or a cabinet face pulls loose and suddenly the whole kitchen feels off. We’ll come out, identify what’s actually wrong, give you a written price before any work starts, and handle the rest.
A quick note for clarity: Sawyer Remodeling is an independent remodeling contractor in Los Angeles. We’re not affiliated with Oldcastle, but we’ve installed and serviced enough Oldcastle kitchens across LA to know exactly how their cabinet systems go together, what fails first, and what’s worth fixing versus replacing.
Key Takeaways
- Full Oldcastle kitchen remodel in Los Angeles: $16,520 to $53,100
- Smaller Oldcastle kitchen refresh: $10,620 to $23,600
- Cabinet installation alone: $4,720 to $15,340
- We stock common Oldcastle-compatible hinges, slides, and cabinet hardware on the truck
- Written price before work starts, 365-Day Done Right Promise included
Which Oldcastle Models This Applies To

Oldcastle kitchen cabinetry comes in several series lines, and the compatibility details matter more than most people expect. The older Oldcastle builder-grade lines used standard 35mm cup hinges with a 1/2-inch overlay, while the newer lines moved to soft-close hardware with a different mounting pattern. If you grab a replacement hinge off the shelf without checking the overlay, the door won’t sit flush no matter how much you adjust it. We see this constantly in Los Angeles condos and mid-century homes where kitchens were updated in waves over the decades.
To identify your cabinet hardware, pull one hinge off and look for a stamped number on the back, or measure the cup diameter. Most Oldcastle cabinet boxes from the last 15 years use either a 35mm or 40mm cup. The older frames are face-frame construction; newer ones are frameless. That distinction changes everything about which slides and hinges fit. If you’d rather not guess, we’ll figure it out in about ten minutes on site. Our techs carry common Oldcastle-compatible hardware, but for cabinet doors or drawer fronts that need to be matched to your existing finish, we order directly through suppliers that carry the exact series.
Styles & brands we work with







Signs Your Oldcastle Kitchen Remodeling Is Failing
- Cabinet doors that won’t close evenly. Worn hinge bushings or a loosened mounting plate cause the door to sag or bounce back. Left alone, the misalignment puts stress on the hinge and eventually strips the screw holes.
- Drawers that grind, stick, or drop. Oldcastle drawer slides, especially the older side-mount models, lose their ball bearings over time. You’ll feel it as a rough pull, then a sudden drop when the drawer’s half open.
- Loose or peeling cabinet faces. In LA’s dry heat and occasional humidity spikes, the laminate or veneer on older Oldcastle cabinet faces can delaminate. Once moisture gets behind the surface, it’s not a repair, it’s a replacement.
- Soft-close stops working. The cylinder inside the hinge wears out after roughly a decade of daily use. You’ll hear the door slap shut instead of easing closed. The fix is a new hinge, not a new door.
- Shelving that flexes or cracks. Particleboard shelves in older Oldcastle units sag under heavy dish loads. A bowed shelf is a warning sign that the supports are near failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Los Angeles, an Oldcastle kitchen remodel runs $16,520 to $53,100 depending on scope. A small kitchen refresh that keeps the existing layout but replaces cabinet faces, hardware, and countertops lands between $10,620 and $23,600. Cabinet installation alone is $4,720 to $15,340, and countertop work runs $2,360 to $7,670.
What drives the spread is materials, not mystery fees. Custom cabinet faces in a matched Oldcastle finish cost more than stock replacements. Full soft-close upgrades cost more than keeping your existing hardware. Every quote we write is line-itemed, so you’ll see exactly where the money goes before you approve anything. The price we quote is the price you pay. No change orders manufactured mid-project. And every job carries The Relay Visibility Guarantee: live arrival tracking, photo updates before and after, and a written price before tools come out. Our 365-Day Done Right Promise backs the work for a full year. If something’s not right, we make it right, no argument.
DIY or Call Us?
Here’s an honest split. Replacing a single hinge or drawer slide you’ve correctly identified is a 15-minute job with a screwdriver, and plenty of LA homeowners do it themselves. Where DIY goes wrong is when the problem is structural: a stripped hinge plate that’s pulled out of particleboard, a cabinet face that’s delaminated, or shelves that have failed. Shoot a little wood filler in there and it’ll hold for a month, then fail worse than before. That’s when you’ll wish you’d called. Good work doesn’t need a sales pitch, it just needs to be done right.
Luca Romano grew up in Silver Lake and learned this trade from his uncle, who gutted and rebuilt their duplex one weekend at a time. He’s been swinging tools in Los Angeles for over two decades. If your Oldcastle kitchen’s giving you trouble, call (254) 272-5876 and we’ll tell you straight whether it’s a repair or a replacement.
FAQs

In LA’s climate, Oldcastle cabinetry typically lasts 15 to 25 years before the doors, hinges, and drawer slides start showing real wear. The dry air helps the wood frames, but the heat cycles eventually break down adhesive and laminate. The hardware usually fails first, which is why many homeowners refresh hinges and slides around year 12. If your cabinets are older than that and you’re seeing multiple failures, call (254) 272-5876 for an honest assessment.
Yes, hinges, slides, and hardware can almost always be repaired or swapped, and a single damaged cabinet face can be replaced without redoing the whole kitchen. What can’t be reliably repaired is particleboard that’s been water-damaged or a face that’s delaminated across more than a third of its surface. We’ll tell you which one you’re dealing with before you spend a dollar.
A full Oldcastle kitchen remodel in Los Angeles typically takes 3 to 8 weeks depending on whether cabinets are being refaced or fully replaced and whether countertops are changing. A hardware-only upgrade, like swapping every hinge and slide to soft-close, can be done in a single day. We’ll give you a timeline in writing with your estimate.
We stock common Oldcastle-compatible hinges, drawer slides, shelf pins, and mounting hardware on our service trucks, so most hardware failures can be fixed on the first visit. For cabinet doors or drawer fronts that need a finish match to your exact Oldcastle series, we order from suppliers who carry that line and schedule the install once the parts arrive. Call (254) 272-5876 for a free estimate, and we’ll confirm what we can do same-visit.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.


