Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Driveway & Pavers: The Los Angeles Owner’s Guide
Techo-Bloc paver driveway installation in Los Angeles typically runs $8,260 to $21,240 depending on square footage, base prep, and pattern complexity. We stock Techo-Bloc-compatible pavers and matching edge restraints on our trucks, and most driveway repairs or section replacements can be completed in one to two days once materials are confirmed. The most common way homeowners find us: a paver sinks near the garage apron after heavy rain, or a section of edging pops loose and the border pavers start drifting into the lawn.
You bought Techo-Bloc because the color consistency and dimensional tolerances beat what the big-box stores carry. When a section fails, you want the replacement to match, not stand out like a patch job. That’s exactly what we handle.
Which Techo-Bloc Models This Applies To
The parts and service we cover span the Techo-Bloc driveway and paver lines most common in Los Angeles: Blu 60, Blu 80, Aberdeen, Villagio, and the larger-format Industria slab. Each series has its own thickness spec and joint width. Blu 60 runs 60mm thick, Blu 80 runs 80mm thick for heavier vehicle loads, and Industria slabs come in 600mm x 600mm squares that require a different screed depth than the smaller units. If you try to swap a Blu 60 into a driveway built with Blu 80, the height difference will show within months as the thinner paver settles.
The gotcha most owners don’t know: Techo-Bloc changed the chamfer profile on several colors around 2021. If your driveway was installed before then, a brand-new paver of the same color name may have slightly crisper edges than the originals. We match by lot code when possible. When we can’t, we blend the new pavers into a low-visibility corner rather than dropping them in the middle of the field. Sawyer Remodeling is an independent contractor, not affiliated with Techo-Bloc, but we’ve worked with their product lines long enough to know these quirks.
For most driveways, OEM Techo-Bloc is the right call: the color match and dimensional consistency matter more than saving a few dollars per square foot on an aftermarket approximation. Where an aftermarket equivalent makes sense is edging and base materials, where brand matters less than the structural spec.
Styles & brands we work with
Signs Your Techo-Bloc Driveway & Pavers Is Failing
- Sinking or low spots near the apron. Usually means the base layer has eroded or was never compacted properly. Water runs under the pavers during LA’s winter rain bursts, washing out the fines, and the pavers drop into the void.
- Edge pavers drifting outward. The plastic or concrete edging has failed or was staked too shallow. Once the border moves, it cascades: the field pavers lose their lateral lock and start shifting one by one.
- Pooling water that takes days to drain. Techo-Bloc pavers are permeable at the joints, but if the base holds water instead of passing it through, you’ll see dark wet patches and, eventually, moss or algae in shaded areas.
- Wobbling or rocking pavers underfoot. A single loose paver often means the sand joint has blown out. Multiple loose pavers in the same area means the base itself is compromised.
- Mismatched patch colors after a prior repair. If a previous contractor grabbed whatever was in stock, you’ll notice it every time you pull into the driveway. We replace those with correct-lot Techo-Bloc and re-sand the joints so the repair disappears.
Replacement Cost & What’s Included
In Los Angeles, a Techo-Bloc paver driveway replacement runs $8,260 to $21,240 installed. The spread comes down to three things: square footage, base condition, and pattern choice. A simple running-bond layout over a healthy base sits at the low end. A herringbone or double-border design with a full base rebuild sits at the high end.
| Scope | Price Range |
|---|---|
| Full paver driveway installation (Techo-Bloc) | $8,260 – $21,240 |
| Section repair (50 – 150 sq ft) | $1,500 – $4,000 |
| Edge restraint replacement | $400 – $1,100 |
| Full base rebuild (adds to any job) | $3,000 – $7,000 |
| Re-sanding and joint stabilization | $500 – $1,400 |
Every quote includes base inspection, paver matching by lot where possible, polymeric sand for the joints, and cleanup. The written price you approve is the price you pay, no change orders unless we find something structural under the pavers and show you photos before touching it. The work carries our 365-Day Done Right Promise: if a section we repaired starts moving within a year, we come back and make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do: check your paver joints after heavy rain, look for gaps in the edge restraint, and run a hose over suspicious low spots to see where water pools. If one paver is loose and the base under it is intact, you can lift it, add a thin layer of coarse sand, and reset it. That’s a Saturday morning job.
Where DIY goes wrong is the base. Once the base layer under a Techo-Bloc driveway starts failing, no amount of surface patching holds. You need the pavers pulled, the base re-excavated to the right depth, new compacted aggregate, and a re-screed in the correct thickness for your specific paver series. Skip that and you’ll have the same sinkhole in six months. The paver itself is heavy but not dangerous; the risk is wasting a weekend and a few hundred in materials on a repair that won’t last.
If you’re not sure whether you have a base problem or a surface problem, call us at (254) 272-5876. We’ll look at it and tell you straight.
FAQs
A properly installed Techo-Bloc paver driveway in Los Angeles lasts 25 to 30 years before the pavers themselves need replacing, though the base layer often needs rework at the 15 to 20 year mark. California’s UV exposure fades some colors faster than others, but the structural lifespan holds up. Call (254) 272-5876 and we’ll inspect your base before recommending a full replacement versus a reset.
Yes, if the base is sound and the problem is isolated to a section, repair typically costs $1,500 to $4,000 compared to a full replacement. We’ll pull the affected pavers, check the base, reset everything, and match the color by lot where possible. Call (254) 272-5876 for a free estimate on your specific repair.
A full Techo-Bloc driveway replacement in Los Angeles takes 3 to 5 days including base work, while a section repair is usually done in 1 to 2 days. Weather in LA rarely delays work, but if we hit a wet stretch we’ll tell you the revised schedule the same day. Call (254) 272-5876 to get your project on the calendar.
We stock common Techo-Bloc colors and sizes on our trucks and can order any series through our supplier network, usually within 3 to 5 business days. You never have to source materials yourself or coordinate delivery. Call (254) 272-5876 and we’ll confirm what we have or what we need to order for your driveway.
Contact Us
If you’ve got a Techo-Bloc driveway that’s sinking, drifting, or just looks tired, call Sawyer Remodeling at (254) 272-5876. We’ll give you a written price before any work starts, photos of whatever we find under the pavers, and a full year of accountability if anything we touched fails. Good work doesn’t need a sales pitch, it just needs to be done right.
Written by Luca Romano, Owner, Sawyer Remodeling at Sawyer Remodeling, serving Los Angeles and nearby areas.
