Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Mr-Glass Construction
We provide Mr Glass repair in Los Angeles as an independent construction service, from sliding door track rebuilds and roller replacements to full frameless shower enclosure installs. The difference comes down to this: we’ve worked on hundreds of Mr-Glass doors, windows, and shower enclosures across Los Angeles, so we know exactly which parts wear out, why they fail, and whether a repair will actually hold up before we quote it. Call (254) 272-5876 for a written estimate. As an independent Mr-Glass service provider, we are not authorized by Mr-Glass, which means we source parts based on what your door or window actually needs, not what a corporate parts diagram says should work.
Luca Romano, owner of Sawyer Remodeling, grew up in Silver Lake and learned framing and finish carpentry at Los Angeles Trade-Technical College. He’s been swinging tools across LA for over two decades, and the crew that works on Mr-Glass products here is the same crew that handles our full remodeling work: background-checked, uniformed, and accountable under The Relay Visibility Guarantee. That means a live arrival time, photo updates before and after, and a written price before a single tool is picked up.
Why Trust Sawyer Remodeling for Your Mr-Glass Construction?
Our crew has installed and retrofitted Mr-Glass systems across hundreds of Los Angeles homes and nearby areas like Mr Glass service in Glendale, from older Mid-City bungalows to newer builds in the Valley. We know how Mr-Glass tracks, seals, and hardware behave under real California conditions: intense UV exposure, dry air, coastal salt in some areas, and the fine dust that works its way into every track and roller. That field experience is the difference between a tech who guesses and a crew that knows that a Mr-Glass Elite Series patio door with a flat-spotted roller almost always needs the track cleaned and polished, not just a roller swap.
We use OEM-spec Mr-Glass tracks, rollers, and seals when they’re available, and high-quality aftermarket hardware when OEM parts are backordered or discontinued. Stainless steel rollers, nylon-tired wheels, EPDM weatherstrip. Same fit, same function, often with better longevity than the original part. Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right, backed in writing. And because we’re independent, not authorized by Mr-Glass, the recommendation you get is based on what your door or window actually needs. Good work doesn’t need a sales pitch, it just needs to be done right.
Luca has spent more than twenty years doing clean tile layouts, tight trim, and installs that don’t look dated in five years. That standard carries into every Mr-Glass service call we run in Los Angeles.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Los Angeles
- Sliding door rollers flattening and binding on the track. Mr-Glass Elite Series sliding patio doors take a beating in high-use Los Angeles patios. After five to seven years, the original nylon rollers flat-spot. The door gets heavy, scrapes, and eventually binds. The fix is usually new rollers plus a track clean and polish, not a whole new door. In Sherman Oaks, a homeowner had two Mr-Glass Elite Series doors that were nearly impossible to open. The original rollers had flat-spotted and the aluminum track was packed with 12 years of grit. We pulled the panels, replaced the rollers with stainless-steel aftermarket units, cleaned and polished the track, adjusted the door height. Both now glide with one finger.
- Glazing seals and weatherstripping shrinking and cracking under UV exposure. Southern California sun is brutal on EPDM and vinyl. The seals around Mr-Glass fixed panels and the weatherstripping on sliding units dry out, shrink, and crack. You feel a draft, you see water intrusion at the sill, and eventually a dual-pane unit fogs. We replace the seal or weatherstrip before the glass unit fails when we can. When the seal has already blown and the glass is fogged, the honest call is replacement of the glass unit.
- Screen door frames and corner joints loosening or pulling apart. Mr-Glass sliding screen doors take constant lateral force. Over time, the corner joints on the screen frame loosen, the frame racks, and the screen sags or the door stops sitting square in the track. We can often re-square the frame and replace the corner hardware, re-screen the panel, and get it sliding right again without replacing the whole door.
- Track channels accumulating debris and oxidizing. Los Angeles dust, pet hair, and the occasional rain. The bottom track on a Mr-Glass sliding door collects all of it. The track oxidizes, the door drags, and the bottom rail wears unevenly. We clean the track channel, address any corrosion, and set the door height correctly so the full weight rides on the rollers instead of scraping the rail.
- Frameless shower enclosure hardware loosening or seals degrading. Mr-Glass custom frameless shower enclosures rely on hinges, clips, and seals that stay watertight under daily heat-and-moisture cycling. Los Angeles bathrooms in older homes often have uneven walls, and a frameless panel that’s slightly out of plumb will put constant stress on the hinge. We re-set panels, replace worn hinges and seals, and make sure the glass sits true.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We use OEM-spec Mr-Glass tracks, rollers, and seals when available, and high-quality aftermarket hardware when OEM parts are backordered or discontinued. Stainless steel rollers hold up better than the original nylon units in a heavy-use patio door. EPDM weatherstrip outlasts the vinyl that came from the factory. Nylon-tired wheels are quieter on the track. We stock common Mr-Glass roller dimensions, weatherstrip profiles, and seal gaskets locally in Los Angeles and Long Beach, so most sliding door repairs don’t wait on a parts shipment.
Here’s how we make the repair-versus-replace call: for a door with solid glass and a solid frame, we usually repair or rebuild the moving hardware. Save the door, fix what’s actually worn. If the glass unit is fogged or the frame is bent, replacement is the honest recommendation, and we’ll tell you that before any work starts. Call (254) 272-5876 for a written estimate on your Mr-Glass repair or install.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect the track, rollers, seals, and glass condition. For a sliding door, we check roller height, track wear, and panel square. For a shower enclosure, we check plumb, hinge tension, and seal condition. You get a written price for the repair before any work starts.
- 2
Repair or install. We roll in with the right Mr-Glass parts: OEM-spec or proven aftermarket hardware. For door work, we pull the panel, replace rollers and seals, clean and polish the track, and re-set the height. For shower enclosures, we level the panels and secure all mounting hardware.
- 3
Test & adjust. Every door gets opened and closed a dozen times. Every shower enclosure gets a water test. We don’t call a job done until it moves or seals the way it should.
- 4
Warranty & follow-up. Every job carries the 365-Day Done Right Promise in writing. If something isn’t right within a year, we come back and make it right. No argument, no runaround.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Los Angeles
We work on the full range of Mr-Glass residential products across Los Angeles:
- Mr-Glass Elite Series sliding patio doors – roller replacement, track rebuild, seal and weatherstrip work, panel re-alignment.
- Mr-Glass E-Series aluminum sliding windows – track cleaning and rebuild, roller and glide replacement, seal and weatherstrip replacement.
- Mr-Glass 1900 Series telescoping sliding glass doors – multi-panel alignment, roller and track service, seal replacement, and panel adjustment.
- Mr-Glass custom frameless shower enclosures – new installs, glass panel replacement, hinge and clip service, and seal replacement.
We keep common Mr-Glass roller profiles, weatherstrip, and seal gaskets stocked locally in Los Angeles, so most repairs happen same-visit. When a specific part isn’t on the truck, we tell you before we leave, not after.
We Also Service These Brands
Mr-Glass isn’t the only system we work on. Sawyer Remodeling services KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Mr-Glass project touches a kitchen or bathroom, we can handle the full scope.
FAQs – Mr-Glass Construction Service in Los Angeles
Yes, in most cases. A Mr-Glass sliding door that jumps the track usually has a flat-spotted roller or a track channel packed with debris. We replace the rollers, clean and polish the track, and re-set the door height. If the frame is straight and the glass is solid, the door doesn’t need to be replaced. Call (254) 272-5876 and we’ll give you a straight answer.
We do. We keep common Mr-Glass roller dimensions and EPDM weatherstrip profiles stocked locally in Los Angeles. For parts that aren’t on the shelf, we source OEM-spec or high-quality aftermarket hardware and give you a timeline before we start. No mystery parts, no surprise delays.
Usually, yes. Mr-Glass frameless shower enclosures are cut and fitted to your specific opening, so an out-of-square wall or a slightly unusual layout is a normal install for us, not a problem. We measure precisely, order the glass, and set the panels plumb. Call (254) 272-5876 for a free estimate on your enclosure.
In most cases, yes. If your Mr-Glass dual-pane unit is fogged, we can replace the glass unit itself without replacing the whole frame. We measure the existing unit, order a matching insulated glass panel, and install it cleanly. If the rest of the frame is solid, glass replacement is the smart money.
Most Mr-Glass sliding door repairs take a few hours on site. A door panel with new rollers, track service, and seal replacement is usually a same-day job. A custom frameless shower enclosure install typically takes one day for the panel set, depending on the glass and hardware. We’ll give you a clear timeline before work starts.
Here are the ranges we see for the Mr-Glass work we do in Los Angeles and Anaheim:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Frameless Glass Shower Enclosure (part of shower remodel) | $3,540 – $10,030 |
| Cabinet Installation & Refacing (kitchen) | $4,720 – $15,340 |
| Bathroom Remodel | $10,620 – $33,040 |
These are full-project ranges. A simple roller replacement or seal swap lands well below these numbers. Call (254) 272-5876 for an exact written quote on your specific Mr-Glass job. Estimates are free.
Book Your Mr-Glass Service in Los Angeles, CA
If your Mr-Glass door drags, your seals are shot, or you want a frameless shower enclosure installed right, call (254) 272-5876. You’ll get a written price before any work starts, a live arrival time, and a crew that knows Mr-Glass hardware inside and out. Free estimates, no pressure.
Written by Luca Romano, Owner at Sawyer Remodeling, serving Los Angeles since 2005.
