Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose CGI Construction
We provide CGI repair in Los Angeles, specializing in cabinet installation, repair, and replacement work that keeps your kitchen functional without a full tear-out. CGI’s ready-to-assemble and frameless cabinet lines are popular in Los Angeles homes for good reason, but they have specific failure patterns around the sink base, west-facing doors, and heavy daily use that a carpenter needs to understand. Because we’re independent, we pair CGI components with higher-quality aftermarket hardware when it makes sense, and we tell you honestly when a cabinet just needs to be replaced.
Luca Romano, owner of Sawyer Remodeling, learned finish carpentry at Los Angeles Trade-Technical College and has been working in kitchens across this city for over two decades. He’s seen how CGI boxes hold up in everything from 1920s bungalows to new condos off the 10. We’re not authorized by CGI, and we’ll never imply otherwise. What we are is a crew that works with these products weekly and knows exactly what to fix, what to replace, and what to leave alone. Call (254) 272-5876 for a free estimate.
Why Trust Sawyer Remodeling for Your CGI Construction?
Our familiarity with CGI comes from repeat exposure. We install these cabinets, we repair them, and we’ve seen what happens to them after five or ten years in a Los Angeles kitchen with hard water, dry heat, and afternoon sun pouring through the windows. That’s the difference between a crew that reads spec sheets and one that has held a delaminated CGI door in its hands and figured out why it failed.
We use OEM CGI doors, drawers, and hardware whenever they’re available, because matching the original finish matters. But for hinges, drawer slides, and shelf pins, we often install aftermarket parts rated for more open-close cycles than the originals. The customer gets a smoother drawer and a longer lifespan. Luca’s training at LATTC taught him framing and finish work, but two decades in Los Angeles kitchens taught him that hardware upgrades are where independent shops earn their keep. We’re not locked into one manufacturer’s catalog, so we can spec the best-value component for the specific cabinet, not the one that happens to come from the same brand.
Styles & brands we work with
Common CGI Construction Problems We Fix in Los Angeles
- Sun-warped and cracked doors. West-facing kitchens in Los Angeles catch brutal afternoon sun, and CGI shaker and raised-panel doors with painted or thermofoil finishes suffer for it. The door skin expands at a different rate than the substrate, so edges lift, crack, or delaminate. We’ve seen this repeatedly in neighborhoods like Silver Lake and Los Feliz, where older homes have big, unprotected windows over the sink.
- Swollen particleboard boxes around the sink and dishwasher. A slow drain leak or a dishwasher steam vent that points the wrong way introduces moisture into the cabinet box. Particleboard swells, the gable bows, and the door stops sitting square. By the time the homeowner notices, the box is usually compromised. We assess whether it’s localized or structural.
- Stripped or pulled-out shelf pins. CGI melamine interiors are durable, but repeated heavy loads on adjustable shelves eventually strip the pin holes. Pots, pans, and stacks of plates put real stress on those little plastic sleeves. Once the hole widens, the pin drops and the shelf crashes. We drill and install larger pin sleeves or, in some cases, upgrade to full-extension rollout trays.
- Peeling thermofoil and painted edges. Heat cycling from the oven or dishwasher eventually lifts the edge banding or the finish layer at the seams. In Los Angeles, where kitchens are often galley-style and tight, appliances sit close to cabinets, and the repeated hot-cold cycle takes a toll. Once the edge peels, moisture gets behind it and it spreads.
- Loose or misaligned Euro hinges. CGI frameless cabinets rely on Euro hinges, and those hinges drift over time. Doors start sagging, rubbing, or failing to close. Sometimes it’s a five-minute adjustment. Sometimes the hinge plate has pulled out of the particleboard and needs a repair plate or a relocation.
CGI Parts & Our Repair-vs-Replace Approach
Here’s how we think about parts. For visible components like doors, drawer fronts, and moldings, we use CGI OEM parts whenever possible. Matching the original factory finish is nearly impossible with aftermarket doors, especially on painted lines where the sheen and color shift subtly between batches. If the OEM part is discontinued or backordered, we’ll tell you before we order anything.
For hardware like hinges, slides, and shelf pins, we’re comfortable using brands like Blum, Grass, or Salice when the cycle rating exceeds the original CGI hardware. These are upgrades, not compromises. The repair-vs-replace decision comes down to the box. If a CGI box is swollen or delaminated beyond the sink or dishwasher opening, we recommend replacing that cabinet rather than resurfacing over compromised material. Resurfacing a swollen particleboard box just hides the damage. It doesn’t fix it. Call (254) 272-5876 and we’ll assess yours on site.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect every cabinet, door, hinge, and slide in the affected area. For CGI specific issues, we check for sun exposure, moisture intrusion, and warping patterns that tell us whether the problem is isolated or systemic.
- 2
Repair or install. Depending on what we found, we either replace the damaged doors and hardware, rebuild a compromised box with new CGI components, or install new cabinets where a repair won’t hold. We match existing layout, profile, and finish as closely as the product line allows.
- 3
Test. Every door opens, closes, and sits square. Drawers slide without binding. Shelf pins hold under load. We run the dishwasher and check for steam intrusion points before we call it done.
- 4
Warranty. Every job carries our 365-Day Done Right Promise in writing. If something’s not right within a year, we come back and make it right.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Los Angeles
We work across the CGI product range you’re most likely to find in Los Angeles homes and provide CGI service in Glendale. This includes CGI ready-to-assemble (RTA) cabinet lines, which are common in condo remodels and DIY-upgrade situations. We also service CGI Euro-style frameless cabinets, which show up in newer builds and modern remodels, and CGI raised-panel and shaker door series, which tend to live in older and transitional kitchens.
Beyond the cabinet boxes, we handle CGI quartz and granite countertop slabs, including full-height backsplashes. We keep common hardware on the truck, and we can order OEM doors and boxes quickly for standard lines. Custom or discontinued finishes might take longer, and we’ll tell you that upfront rather than promising a timeline we can’t hit.
We Also Service These Brands
CGI is one part of what we do. Our crew also installs and repairs cabinetry from KraftMaid and Cambria, works with Silestone countertops and Kohler fixtures, and handles full kitchen remodels that mix several brands on the same project. Being multi-brand means we’re not stuck recommending a CGI part when another manufacturer makes something better for your specific kitchen.
FAQs – CGI Construction Service in Los Angeles
Yes, in most cases. If the original line is still in production, we order OEM doors in the same color, profile, and finish. If the line has been discontinued or the finish has aged, matching gets harder, and we’ll show you options before ordering anything. Call (254) 272-5876 for a free assessment.
No, usually not. If the swelling is confined to the sink base, we can replace that single cabinet with a new CGI plywood or upgraded box and leave the surrounding cabinets untouched, and we also offer CGI service in Long Beach. If swelling has spread through multiple adjacent boxes, the repair scope changes. We’ll show you exactly what’s damaged before we quote anything.
Yes. Los Angeles water is hard, and mineral buildup dulls the surface faster than in other markets. Quartz is more forgiving than granite, but both benefit from wiping spills quickly, especially citrus and wine, which etch polished surfaces. We’ll walk you through specific care during your installation. Call (254) 272-5876 for a quote.
Yes, and this is where experience pays off. Older Los Angeles homes, especially 1920s Spanish and Craftsman-style houses, have out-of-level floors and out-of-plumb walls. We shim, scribe, and adjust every box during installation so your doors sit square and your counters don’t have gaps. A straight-looking kitchen starts with careful prep work, and we’ve done plenty of it across this city, including Anaheim CGI service.
For a standard kitchen, not a full remodel, plan on two to four days. That includes assembly if it’s RTA, installation, hardware mounting, and final adjustments. A full kitchen remodel with counters, backsplash, and appliances runs longer, typically three to six weeks depending on scope and material lead times.
The pricing below reflects what we see across the Los Angeles market. Exact numbers depend on kitchen size, material choices, and access.
| Service | Price Range |
|---|---|
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
We recently remodeled a 1938 Spanish-style kitchen in Los Angeles where the original CGI frameless boxes were still square but the shaker doors had sun-cracked and the sink base had swollen from a slow drain leak. We replaced the sink base with a new CGI plywood box, kept the sound perimeter cabinets, and installed new CGI quartz counters with a full-height backsplash. The homeowners kept their cabinet layout and gained a water-resistant, sun-stable kitchen without a full tear-out. Good work doesn’t need a sales pitch – it just needs to be done right. Call (254) 272-5876 to schedule your free estimate.
Book Your CGI Service in Los Angeles, CA
If your CGI cabinets are warped, swollen, peeling, or just not closing right, call (254) 272-5876 to schedule a free estimate with our Los Angeles crew. We’ll inspect the damage, walk you through your options, and put the price in writing before you decide anything.
Written by Luca Romano, Owner at Sawyer Remodeling, serving Los Angeles since 2005.
