Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Ontario, CA | Sawyer Remodeling
CGI construction service in Ontario comes down to one thing most contractors miss: these cabinets were often hung on walls that were never square to begin with. We’re Sawyer Remodeling, an independent CGI service provider working across Ontario, and we fix what the original install got wrong. If your CGI cabinet doors won’t close flush or the drawers bind, call (254) 272-5876 for a free estimate.
Why Ontario Residents Choose Us for CGI Service
CGI cabinets show up in a lot of Ontario kitchens, especially in homes built from the 1960s through the 1980s. We know these cabinet lines inside and out because we’ve repaired and replaced hundreds of them across the Inland Empire. Luca Romano, our owner, started swinging tools in LA over two decades ago and learned framing and finish carpentry at Los Angeles Trade-Technical College. That matters when your CGI cabinet boxes sit on walls that have shifted half an inch since Reagan was president. We stock OEM-equivalent hinges, soft-close glides, and shelf clips locally so we’re not waiting on a parts truck from three states away. And every job gets the Relay Visibility Guarantee: a written price before work starts, live arrival time, and photo updates before and after. No guessing, no surprises at the door.
Styles & brands we work with
Common CGI Construction Problems We Solve in Ontario
- Thermofoil door skins delaminating at the edges. Ontario’s inland valley heat swings from cold desert nights to triple-digit summers, and that repeated expansion and contraction is brutal on thermofoil. The skin lifts at the bottom edge first, then peels back like a sunburn. We replace the doors with new CGI-spec thermofoil or upgrade you to painted shaker doors if you’re tired of fighting it.
- Soft-close drawer glides that stop latching. CGI’s soft-close mechanisms are fine when they’re new, but after years of daily cycles in a busy Ontario family kitchen, the tension gives out. Drawers start slamming shut or creeping back open. We swap in OEM-spec soft-close glides and the drawers work like the day the kitchen was built.
- Particleboard boxes swelling at the sink base. Ontario homes on slab foundations hide small leaks until they’ve already done damage. A slow drip under the sink wicks into the particleboard cabinet box and it swells, delaminates, and loses structural hold. If one box is bad, we can often replace just that run; if multiple boxes are compromised, we’ll tell you straight that replacement beats patching.
- Hinges and face frames stripped or cracked. When a home settles on Ontario’s expansive clay soil, cabinet frames go out of square. That puts uneven load on hinges, strips screw holes, and cracks face frames. We shim and re-square the frames, then re-hang doors with new hardware so they close clean.
- Out-of-square walls from the original install. We see this constantly in Ontario’s older housing stock. The original CGI cabinets were hung on walls that weren’t straight, and every door alignment problem traces back to that. Any refacing or replacement starts with correcting the wall, not just slapping new boxes over the same mistake.
CGI Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you about CGI cabinets in Ontario: the city’s housing boom decades ago put up thousands of homes fast, and many kitchens were roughed in without anyone checking wall squareness before the cabinet boxes went up. Drive neighborhoods like the ones near Euclid Avenue or Holt Boulevard and you’ll see the same original kitchens, same original CGI cabinets, and the same telltale gaps where doors don’t align at the top corner. Fixing that properly means pulling the face frames, shimming them square to the actual wall plane, and reinstalling everything level. Skip that step and your new doors will hang crooked exactly like the old ones did. In Ontario, the wall is usually the problem, not the cabinet. That’s the difference between a real repair and a cosmetic one, and it’s why we always check squareness before we quote a reface or replacement.
CGI Models & Products We Service in Ontario
We work on the full CGI lineup: Ready-to-Assemble (RTA) shaker and raised-panel lines, thermofoil (TFL) slab and raised-panel doors, plywood-box and particleboard-box cabinet lines, and the soft-close drawer glide and hinge systems across all of them. When parts are available, we use OEM-equivalent CGI hinges, glides, and shelf clips. When they’re not, we use high-quality aftermarket soft-close replacements that hold up better than cheap generics. If one or two doors or drawer boxes are failing, we repair. If the boxes are swollen or most glides have already failed, we’ll recommend replacing the run instead of throwing money at individual parts. For a deeper look at our broader work with this brand, see our CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Ontario
Here’s the range for common CGI work in Ontario from your General Contractor - Ontario team. These are honest numbers, not bait:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What drives the price is simple: how many boxes need work, whether the walls need re-squaring, and whether you’re repairing doors or replacing a full run. Your free estimate includes a written line-item price before any work starts, so the number on the invoice is the number you approved. Call (254) 272-5876 and we’ll come measure.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Ontario
You can replace a single door. We’ll match the door profile, finish, and hinge spacing to your existing CGI setup, and shim the face frame square so the new door hangs true alongside the old ones, part of our Bathroom Remodeling in Ontario expertise. Call (254) 272-5876 and we’ll confirm what we can match before you commit.
Nine times out of ten it’s a repair. The soft-close glide loses tension over years of cycles, and we replace the glide assembly with an OEM-spec unit. Replacement only makes sense when the drawer box itself is swollen or the cabinet frame is cracked beyond shimming. We’ll tell you which one you have when we see it.
The inland valley heat and wide temperature swings are hard on thermofoil skins specifically. CGI thermofoil doors peel at the edges faster in Ontario’s dry summer heat than they would in a coastal climate. That’s a thermofoil characteristic, not a knock on CGI specifically, but Ontario owners should expect more edge delamination over time.
Yes. We check the cabinet boxes for squareness and structural integrity first, because stone countertops need a level, solid base. If your boxes are sound, we install the countertop directly on them. If the boxes have swollen or shifted, we’ll fix that before the stone goes down. Call (254) 272-5876 for a free estimate.
Refacing works when the boxes are square, dry, and structurally sound, and only the doors and face frames are worn or dated. We pull a few doors and check the boxes before we recommend anything. If the boxes are swollen or the frames are cracked, refacing is throwing good money after bad, and we’ll tell you that directly.
Service Areas Near Ontario
We serve Ontario and the surrounding Inland Empire communities. If you’re in a neighboring city, we cover those too. For CGI work in Northern California, see our CGI service in Elk Grove and CGI service in Santa Rosa pages. For everything we do across the region, visit our Ontario service area page.
Book Your CGI Service in Ontario Today
Good work doesn’t need a sales pitch, it just needs to be done right. Call (254) 272-5876 and we’ll schedule a free estimate for your CGI cabinets in Ontario. Written price first, work second.
Written by Luca Romano, Owner at Sawyer Remodeling, serving Ontario since 2005.
