Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Francisco, CA | Sawyer Remodeling
We’re Sawyer Remodeling, an independent CGI service provider working across San Francisco. We install, reface, and repair CGI cabinetry and countertops in homes from the Outer Sunset to Bernal Heights, and we do it without any manufacturer affiliation. What sets our CGI work apart here is that we understand how this city’s marine-layer humidity, pier-and-beam floors, and famously strict permit process affect your cabinets long after installation. Call (254) 272-5876 for a free estimate on any CGI project in San Francisco.
Why San Francisco Residents Choose Us for CGI Service
CGI cabinets show up in a lot of San Francisco kitchens, especially in pre-war flats and rent-controlled buildings where the original cabinetry got swapped out decades ago. We’ve installed and modified CGI box construction, hinge hardware, and door profiles in hundreds of homes across this city, so we know exactly how their RTA lines, semi-custom assembled series, vanity programs, and quartz tops behave after years of fog and kitchen steam. Luca Romano, our owner at Sawyer Remodeling, spent over two decades learning framing, finish carpentry, and how to read plans without guessing, and that’s the standard we bring to every CGI job. Good work doesn’t need a sales pitch – it just needs to be done right. We’re not a CGI dealer and we don’t claim manufacturer authorization, but we know this product line cold. When your CGI cabinets need work in San Francisco, we’re the crew that shows up with the right parts and a written price before anything gets touched.
Styles & brands we work with
Common CGI Construction Problems We Solve in San Francisco
- Swollen particleboard boxes near the sink. The fog-belt humidity in neighborhoods like the Outer Sunset and Richmond District keeps the air damp year-round, and a slow under-sink drip compounds it. CGI’s particleboard or MDF-core boxes absorb that moisture through unsealed end panels and toe kicks until the box goes soft. We replace the box, keep the straight door fronts, and seal the new unit properly.
- Soft-close hinges that don’t close right anymore. Older San Francisco homes have walls that aren’t plumb, and when CGI doors get hung without shimming square on those out-of-level Sunset and Richmond walls, the hinges work against themselves until they loosen or fail. We re-hang doors square and swap in hardware that holds.
- Faded or uneven CGI door faces. West-facing San Francisco light coming through original single-pane windows beats on one side of a cabinet run for hours, and stained or painted CGI door faces fade unevenly. We match replacement doors or reface the full run so the finish reads consistent from end to end.
- Quartz countertop seams opening at the sink cutout. Pier-and-beam floors settle over time, and CGI quartz tops follow that movement. The seam or edge profile near the sink cutout is where the stress shows first, and we’re called out regularly in San Francisco to repair or reset those tops after the floor’s been leveled.
- Vanity cabinets in bathrooms with poor ventilation. San Francisco bathrooms built before modern exhaust fans trap shower steam, and CGI vanity boxes take the brunt of it. We see delaminating toe kicks and swollen side panels in older Mission and Excelsior homes, and the fix usually means a plywood replacement box with the original door fronts reused.
CGI Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s permit process for kitchen and bath alterations is unusually strict, and inspectors often flag unpermitted cabinet electrical, gas-line, or vent changes discovered when existing CGI cabinetry is removed. We’ve been on jobs where a routine cabinet swap turned into a permit correction because someone years ago moved an outlet or rerouted a gas line behind a run of CGI boxes without pulling paperwork. Because so much of the city’s housing is rent-controlled and long-tenured, we routinely find decades-old CGI boxes still in service behind a tenant’s painted-over doors. The boxes may be soft at the base, the hinges tired, but those doors are still hanging. That’s a San Francisco-specific reality: in a city where people stay put and buildings hold their history, CGI cabinetry gets used far longer than it was ever designed to be. Our job is to know what’s worth salvaging and what needs to go, and to handle the permit side without turning a cabinet project into a bureaucratic mess.
CGI Models & Products We Service in San Francisco
We work across the full CGI product range: Ready-to-Assemble (RTA) all-plywood cabinet lines, semi-custom assembled series in painted and stained door styles, vanity and bath cabinetry programs, and quartz and stone countertop slabs and pre-fab tops. When a customer wants to match an existing run, we specify genuine CGI replacement doors, drawer fronts, hinges, and glides. When aftermarket Blum-style hardware outperforms the OEM part at a better value, we say so and give you the choice. We keep common CGI hardware and shims stocked for fast San Francisco turnaround, and when a box is water-swollen or the door count no longer fits the layout, honest refacing or full replacement usually beats chasing individual parts. Lucas is blunt about that: sometimes the right fix is the one that costs less over three years, not the one that costs less today.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Francisco
Here’s what CGI work costs in San Francisco. These are real ranges we quote, not teaser numbers that change once the job starts. Your price lands in writing before any work begins, and it’s the number on the invoice when we’re done.
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
| Full Kitchen Remodeling | $16,520 – $53,100 |
| Bathroom Vanity Installation | $945 – $3,540 |
What drives the cost is scope: a simple vanity swap is nothing like a full kitchen remodel with new CGI boxes, doors, and quartz tops, or our Bathroom Remodeling in San Francisco. Your free estimate covers the site visit, measurements, and a written line-item quote. Call (254) 272-5876 to schedule yours.
Serving San Francisco, CA - Our Local Coverage Area
We’re a General Contractor in San Francisco and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Francisco
Yes, in most cases we can match your existing CGI cabinet line and door style, and we’ll order genuine CGI doors or drawer fronts when that’s what the job calls for. The catch is that older CGI finishes may have faded unevenly under San Francisco’s west-facing light, so the new pieces might need to be color-blended on site. Call (254) 272-5876 and we’ll tell you straight what’s matchable and what’s not.
Softness near the sink means moisture has gotten into the particleboard or MDF core, and in San Francisco that’s usually a slow under-sink drip combined with marine-layer humidity. The fix is replacing the affected box with a plywood unit, reusing the door fronts if they’re still straight, and sealing the new box properly. Call (254) 272-5876 for an inspection and a written quote.
Refacing or replacing cabinet boxes and doors typically doesn’t require a permit, but if removing the old run exposes unpermitted electrical, gas, or vent work, the inspector may require you to correct it. We handle that conversation with the city, and we’ll tell you upfront if your project is likely to trigger a permit review. Call (254) 272-5876 to talk through your specific situation.
Not unless the cabinets are leveled first. Pier-and-beam floors in San Francisco settle, and new quartz tops will follow that movement and open seams at the sink cutout. We shim and level the cabinets before the countertop goes on, so the top sits flat and the seams stay tight. Call (254) 272-5876 for a free estimate on countertop installation.
Most CGI cabinet and countertop projects in San Francisco run one to three weeks, depending on whether we’re installing new boxes or refacing existing ones, and whether custom door orders add lead time. We’ll give you a written schedule before work starts, and you’ll get photo updates before and after each stage. Call (254) 272-5876 for a timeline on your specific scope.
Service Areas Near San Francisco
We serve San Francisco, plus San Francisco service area coverage that extends to nearby markets where our crews are already working. If you’re outside the city, you can also reach us for CGI service in Fresno or CGI service in Sacramento. For the full picture of what we do, see CGI sales & service.
Book Your CGI Service in San Francisco Today
Ready to get your CGI cabinets or countertops done right? Call (254) 272-5876 for a free estimate. We’ll give you a written price, a real schedule, and a crew that shows up when they say they will.
Written by Luca Romano, Owner at Sawyer Remodeling, serving San Francisco since 2005.
