Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Glendale, CA | Sawyer Remodeling
As a General Contractor in Glendale, we see CGI cabinet installation and repair typically run $400 to $13,000 depending on whether you’re refacing doors, replacing hardware, or doing a full kitchen gut. We’re an independent CGI service provider, not a factory-authorized dealer, which means we can tell you straight when a cabinet is worth saving and when it’s not. The one thing that makes our CGI work different here: we’ve rebuilt enough pre-war Glendale kitchens to know the walls are never square, and that changes everything about how a cabinet box needs to go in. Call (254) 272-5876 for a free estimate.
Why Glendale Residents Choose Us for CGI Service
Luca Romano started framing houses in Los Angeles before CGI cabinets were even a common sight in Glendale kitchens. He came up through LA Trade-Tech, learned finish carpentry the hard way, and spent enough years shimming crooked walls to know that cabinet installation is only half about the cabinet. The other half is the wall behind it.
That’s why Glendale homeowners call us for CGI work. We know CGI’s RTA all-wood boxes, their semi-custom plywood lines, their bath vanities, and their refacing doors and drawer fronts from real installs, not a catalog. We know where the drawer glides sag first. We know which hinge adjustments drift when a peninsula shifts. And we stock dimension-matched aftermarket glides, hinges, and levelers locally so a CGI repair in Glendale doesn’t wait on a parts truck from a warehouse in Riverside.
Every CGI job we take runs under The Relay Visibility Guarantee: a written price before we start, live arrival tracking, and photo updates before and after. If it’s not done right, our 365-Day Done Right Promise means we make it right. No fine print. No phone tag. A live person answers when you call.
Styles & brands we work with
Common CGI Construction Problems We Solve in Glendale
- Racked and bowed RTA boxes: CGI’s ready-to-assemble cabinets are solid all-wood boxes, but if they’re assembled on the floor and set without shimming, the frames twist. Doors gap, drawers bind, and the countertop sits on a slope. We see this constantly in Glendale’s 1920s and 1930s bungalows where the original kitchen floor pitches toward the back door. We pull the boxes, re-square them, and re-level before anything else.
- Sagging drawer glides and loose Euro hinges: Busy family kitchens in Glendale put real mileage on drawer hardware. Soft-close glides lose their adjustment. Hinges drift. Doors start rubbing at the corner. Most of the time this is a hardware adjustment or replacement job, not a cabinet replacement. We match the bore pattern and overlay exactly so the existing doors stay aligned.
- Worn finish and edge chipping on semi-custom doors: CGI’s semi-custom doors hold up well, but the edges around sinks and dishwashers take abuse. Moisture, dish soap, and daily bumps chip the finish. When the box is sound, re-dooring is almost always the smarter spend than a full tear-out. We source genuine CGI doors when the line is still in production.
- Swollen, delaminated boxes from slow leaks: Older Glendale homes with original galvanized supply lines leak slowly behind the sink base or under the dishwasher for months before anyone notices. By then the CGI cabinet box has swollen or delaminated. If the box is gone, replacement is the right call. If it’s cosmetic, we dry it out, repair what we can, and tell you the truth about what’s left.
- Island and peninsula cabinets separating at the seam: When an island or peninsula is fastened only to drywall instead of blocking, it shifts. The seam opens. The doors on each side start fighting each other. We reset the boxes with proper blocking and re-anchor them so the seam stays closed.
CGI Service in Glendale: What Local Conditions Mean for Your Equipment
Glendale’s housing stock includes a big share of 1920s to 1950s bungalows and small ranch homes with original angled or offset kitchens. These rooms were framed before drywall screws and laser levels existed. Walls run out of square by an inch or more over eight feet. Floors slope. Corners are never 90 degrees. For a CGI cabinet install, that means stock layouts fail. The cabinet line might be factory-perfect, but it’s going onto a wall that isn’t.
So we scribe. On a 1940s bungalow off Chevy Chase Drive, a homeowner’s CGI RTA cabinets had been assembled on the floor and set with no shimming or scribing. The doors racked. The counters sat out of level across an out-of-square wall. We pulled the boxes, re-squared and re-assembled them, added plywood shims and a scribed filler panel to the wall, reset the cabinets with proper blocking at the island, re-hung the CGI doors with new soft-close hinges, and set a quartz top over them. Same CGI cabinets. Installed correctly. That’s what a Glendale kitchen actually needs.
Luca Romano grew up in Silver Lake watching his uncle gut and rebuild a duplex one weekend at a time. He’s been swinging tools in LA for over two decades. Good work doesn’t need a sales pitch, it just needs to be done right.
CGI Models & Products We Service in Glendale
We service the full CGI lineup we see in Glendale homes: the Ready-to-Assemble all-wood kitchen cabinet lines, semi-custom and custom plywood-box cabinetry with soft-close doors and drawers, bath vanity and linen cabinet lines, and the cabinet refacing doors, drawer fronts, and matching hardware.
Our parts approach is straightforward. When a CGI door, drawer front, hinge, glide, shelf clip, or touch-up finish is still in production, we order genuine CGI parts from the parts channel. When a part is discontinued, we use dimension-matched quality aftermarket glides, hinges, and levelers, always matching the bore pattern and overlay so the existing cabinet face stays aligned. We don’t push full tear-outs when re-dooring and re-hardwareing will get the job done. And we don’t patch a swollen, delaminated box when replacement is the honest call.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Glendale
Here’s what CGI work in Glendale typically runs. These are the ranges we quote, in writing, before any work starts.
| Service | Typical Glendale Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
What drives the cost: whether we’re refacing or installing new, how far out of square the walls are (more scribing and filler work means more labor), what countertop material you choose, and whether we’re working around one bad cabinet or a full kitchen layout. A free estimate includes measurements, a straight read on what’s worth saving, and a written price you can compare. Call (254) 272-5876 for yours.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Glendale
Yes. We install homeowner-supplied CGI cabinets all the time in Glendale. The catch is that installation quality still comes down to the wall, not the box. If the cabinets were already assembled, we’ll check them for racking and re-square anything that’s off before they go in. If they’re still flat-packed, we’ll assemble them on a level surface with proper alignment before they touch your walls. Call (254) 272-5876 for a quote.
Usually yes, if the boxes and frames are sound. Re-facing CGI cabinets with new doors, drawer fronts, and matching hardware costs significantly less than a full tear-out, and you keep the cabinet layout without losing your kitchen for weeks. If the boxes have swollen, delaminated, or racked, replacement is the better spend. We’ll tell you which one applies after we see the cabinets.
In most Glendale homes, yes. Rubbing doors and dragging drawers usually come down to hinge adjustment, glide wear, or a box that was never squared during install. We adjust or replace the hardware, re-align the doors, and re-square the box if needed. Most of these jobs don’t require new cabinets at all. Call (254) 272-5876 for an exact diagnosis and a written quote.
Yes, and we recommend it. Re-facing the CGI cabinets while the old counters are off means we can set the new quartz top on a level, properly blocked cabinet run, which protects the countertop warranty and keeps the doors from binding later. This is part of our Bathroom Remodeling in Glendale coordination. We coordinate the whole job so the cabinet and counter trades don’t work against each other.
Older Glendale kitchens are rarely square, level, or plumb. The walls angle, the floor slopes, and the corners aren’t true. A stock CGI layout installed without scribing and shimming will rack, gap, and fight the countertop. We measure for out-of-square walls, scribe filler panels to fit, shim the boxes level, and add blocking where islands and peninsulas anchor. That’s the difference between a kitchen that looks fine for a year and one that holds up for twenty.
Service Areas Near Glendale
We run CGI cabinet and kitchen work throughout Los Angeles, Pasadena, Burbank, La Cañada Flintridge, and Eagle Rock. If you’re outside Glendale proper, check our Glendale service area page to confirm coverage. For work further out, we also list CGI service in Ontario and CGI service in Elk Grove for those markets. Our full brand overview lives on the CGI sales & service page.
Book Your CGI Service in Glendale Today
If your CGI cabinets are racked, sagging, or just not right, call (254) 272-5876. We’ll schedule a free estimate, measure the walls, and give you a written price before any work starts.
Written by Luca Romano, Owner at Sawyer Remodeling, serving Glendale, CA since 2005.
